2014-2019 Chevrolet Corvette C7 | Z06 Stage 2 Style ABS Plastic PAINTED CARBON FLASH Front Bumper Lower Lip Splitter with Carbon Fiber Side End Cap Extensions Pair
$499.00
Fits All 2014-2019 Chevrolet Corvette C7 Models 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable). Package Included 1 X Chevrolet Corvette C7 Z06 Z07 Stage 2 Style ABS Plastic Painted Carbon Flash Metallic Front Bumper Lip Splitter, 1 X Pair of Carbon Fiber Side End Caps Extension ( Left & Right ) & 1 X Bag of Hardware Pre-Drilled Holes to Assist with Mounting to Factory Bumper. Installation Manual and Hardware are Included.
› See more product details
| Auto Part Position | Front |
|---|---|
| Installation Type | Screw-In |
| UPC | 680147102197 |
| Manufacturer | Extreme Online Store |
| Item Weight | 4 pounds |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | FLIP-092V2-ABS_SPLITTER-092-BKCF |
| ASIN | B077SBLM8Q |
| Date First Available | November 25, 2017 |
13 reviews for 2014-2019 Chevrolet Corvette C7 | Z06 Stage 2 Style ABS Plastic PAINTED CARBON FLASH Front Bumper Lower Lip Splitter with Carbon Fiber Side End Cap Extensions Pair
Add a review
Related products
$291.00
$263.35
Don Garrett –
5.0 out of 5 stars
Highly recommend!!
This was a great upgrade to my 2015 Corvette Z06. Looks great and adds function too.
LaCreta Wheeler –
5.0 out of 5 stars
Great people
Very good people to work with. Returned Item with no issues.
Ashley I. Deponte –
1.0 out of 5 stars
Bad quality
Dont order from these guys I emailed them and they never reply ordered it in carbon flash and its fish eye everywhere and wasnt even carbon flash stay away
One person found this helpful
Lorenzo WesleyLorenzo Wesley –
5.0 out of 5 stars
They look good on my car
Not bad to install. Need the right amount of hardware
dspdr –
5.0 out of 5 stars
Great product
Great product. Works n looks great.
paula lavio –
5.0 out of 5 stars
Quality
Easy to install
TPR –
4.0 out of 5 stars
Good fit and paint quality for a 2019 Corvette Z06
First off, the shipping experience on this item was horrible. This is normally not the sellers fault but in this case, they are partially to blame. I was not informed this was a signature only items, otherwise, I would have made arrangements for someone to be at my residence to sign for it. UPS would not leave the package at my door even though I signed a notice authorizing them too. I even contacted the seller to change the delivery restrictions by they never responded. This is partly the reason for the reduction of one star. Now, on the to product itself. It was packaged well and arrived undamaged. The installation was easy as all of the pre-drilled holes lined up. The holes for the pop rivets, however, could have been drilled bigger to accommodate the new pop rivets that need to be installed. The other reason for the reduction of one star is the winglets that came with the spoiler. In the picture, they are pre-drilled but they do not come this way. The directions state to install them with 3M tape. Having used 3M tape in the past this is not a long lasting solution to this. IMHO these should have been pre-drilled. With that being said, the alternative is a $3000 spoiler from GM so this certainly is a great value!
3 people found this helpful
Jesse –
5.0 out of 5 stars
Convenient as hell!
This lip was perfect , drilling holes, buying more bolts is not necessary considering u can reuse your stock bolts . Absolutely would recommend for all you c7 owners !
Flame Red –
1.0 out of 5 stars
Disappointed – more like a poverty splitter – not what was pictured or as described.
What I did not realize is that this is apparently a copy of the GM “poverty splitter” and not what I expected from the description.It appears that they improved their packaging greatly over what is shown in some YouTube reviews I found. It was extremely well packaged, with everything in a single box. The box was reinforced on the sides and the contents was carefully and completely wrapped in foam and taped well. The parts were held in the box by supports so it could not shift in transit.I did find flaws in the finish on the underside of the lip. There were hairline cracks on the underside lip where you might expect the splitter to scrape. There were quite a few of them. So quality control is what you might expect from a China product but I don’t know for sure that is where it is made. The areas that show looked good, no flaws. Also the bottom lip was cut crooked – Had a wave to it. Again, this is on the underside, so I guess it would be hard to see when installed on the car.They definitely changed their manufacturing as the one I received did not have a red stripe like what is pictured in the Amazon web site.If it is important to anyone, clearly it is manufactured overseas as I see Chinese symbols along with the English charachers on the stickers on it.The one reservation I have is that evidently the winglets are held on by two sided tape – no hardware! They did not supply the tape. They did supply screws for the splitter, but the car already has screws.I would rate this 0 stars and I was tempted to return but I will install it instead as is with all the flaws.
4 people found this helpful
Bruce WickersBruce Wickers –
5.0 out of 5 stars
Looks great
Very happy
Sean S. –
2.0 out of 5 stars
Missing hardware
The provided instructions call for a couple of screws and bolts to attach the side winglets, although these were not included. Upon contacting the seller, I was informed that 3M tape is sufficient based on customer feedback. Really? I wonder whose testimonials they used and how robust their testing was. Would you trust a couple of carbon fiber end pieces on the front of your car to be secure with a strip of tape at highway speeds? Especially in the heat of summer?Their resolution? Contact GM for parts to fix the problem. Well, who knows how much more money that’s going to cost. Despite the fact that their documentation said to use specific hardware, they neither include it nor provide any real help for this. Don’t bother with this splitter; spend your money on a higher quality one elsewhere. Otherwise you’ll have a pair of useless winglets and a chunk of the money you spent on this wasted.
One person found this helpful
Josh TJosh T –
1.0 out of 5 stars
Does NOT come with mounting hardware
The splitter itself isn’t bad for $450, though the holes leave something to be desired, as you can see from my first pic. My biggest complaint about this is that it doesn’t come with the mounting hardware as the description claims. It comes with some self tapping screws which is NOT what you need to mount it. You need rivets, and specific ones that I am now going to have to pay an arm and a leg for to get from GM. I contacted the merchant hoping that maybe it was just an oversight, but nope, doesn’t come with rivets and the merchant couldn’t care less. My recommendation is spend an extra hundred bucks and buy from another vendor that actually matches the GM factory weave, will include mounting hardware and has proper holes that you won’t have to redrill. Not like this splitter is for a Civic. Treat your vette right. Don’t make my mistake trying to save a few bucks.
One person found this helpful
Glenn E. Williams –
1.0 out of 5 stars
Shipping Problem
Product received damaged by FedEx. Box had been retaped on one of it’s two corner reinforced long sides, two of five box staples on this side were missing, third in place but not working. Part ordered is Front Splitter for a C7 Corvette and has a 6 inch crack at one end. Tried to place a claim with FedEx but unable to drag & Drop picture and Invoice copy into their on-line claims form but submitted what info I could. Hoped that someone would call so I could explain my problem. Claim was rejected by FedEx. Part cost $431.98. frustrated at the moment.